View And Interpret The Power Measurement Results - HP 8711C User Manual

深圳市盛腾仪器仪表有限公司
2. Figure 3-12 shows the results of an example power measurement.
3. To interpret the power measurement, refer to Figure 3-12 or your
analyzer's display if you are making this measurement on your
instrument.
a. When making a power measurement, the display shows the output
power measured at the analyzer's RF IN connector. This power is
absolute power, as opposed to a power ratio.
b. Note that when making a power measurement, the values associated
with the vertical axis are in units of dBm, which is the power measured
in reference to 1 mW.
-10 dBm = 100 PW
Tel:0755-83589391
Making a Power Measurement using Broadband Detection
Fax:0755-83539691
Making Measurements
3-33
Website: www.Sengt.c