HP 8711C User Manual page 198

Using Instrument Functions
Using a Keyboard
For example, to select measurement channel 1 as the active channel, on
the keyboard press Ishirt with a. To preset the network analyzer with the
keyboard, press Ictrl] with IT;il. In each case hold down the first key as you
press the second key. To select Saf%kq 1 , press [nl alone.
In case of difhculty, make sure that the keyboard is connected to the DIN
KEYBOARD connector on the rear panel. The keyboard must be IBM PC/AT
compatible.
Print capabilities:
When you use the analyzer (j-1 function to dump a graph, you don't
get the softkey menu that appears on the right-hand side of the analyzer
display.
Pressing (Shift) (Print] on a keyboard will dump the current graph along
with the current softkey menu.
4-96
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c