HP 8711C User Manual page 446

V
Vertical
Back Porch
Frnt Porch
Position
深圳市盛腾仪器仪表有限公司
external monitors. Also affects network analyzer's internal CRT. Default
setting is 31.84 psec. This setting is not affected by an instrument preset.
See "Using an External VGA Monitor" in Chapter 4 for more information.
Access Keys:
(
SYSTEM OPTIONS
external monitors. Also affects network analyzer's internal CRT. Default
setting is 16.68416 msec. This setting is not affected by an instrument preset.
See "Using an External VGA Monitor" in Chapter 4 for more information.
Access Keys:
(
SYSTEM OPTIONS
display on both the internal CRT and an external monitor. Accepts whole
number values from 1 to 100, with 1 representing as far up as possible and
with 100 representing as far down as possible. The default value set at the
factory (and obtained by pressing Bsstora DefauIte ) is 74. This setting is
not affected by an instrument preset.
See "Using an External VGA Monitor" in Chapter 4 for more information on
using an external display.
Access Keys:
(
SYSTEM OPTIONS
Tel:0755-83589391
)
System
CAT Adjust more
]
)
Fax:0755-83539691
V
9 - 8 3
Website: www.Sengt.co