HP 8711C User Manual page 264

Stand-Alone Analyzers
Running IBASIC
深圳市盛腾仪器仪表有限公司
In this configuration, the measurement is controlled by an IBASIC program
running inside the analyzer. With IBASIC, the measurement setup and control
can be highly automated, reducing the burden on the operator. Since the
measurement is under programmatic control, statistics can be collected in
order to monitor your process and quality. BASIC's keystroke recording lets
you construct programs quickly, without needing to refer to the programming
documentation. Using AUTOST files, the analyzer will load and run your
program when power is turned on.
Since no external computer is required, there are fewer system components
to purchase, maintain, connect, and synchronize.
Configure your system as a stand-alone instrument with IBASIC (Option lC2)
if you would like to:
Minimize the space required for a system
l
Simplify programming with keystroke recording
l
Use IjEiQ key macros
l
Automate measurement setup and control
l
Collect data
l
Run application programs on the analyzer
l
Tel:0755-83589391
Automating Measurements
Configuring Your Test System
Fax:0755-83539691
7-7
Website: www.Sengt.c