Saving Measurement Results To Disk - HP 8711C User Manual

深圳市盛腾仪器仪表有限公司
The analyzer provides two internal RAM disks and one internal 3.5" floppy
disk to which measurement results can be saved.
For the fastest saves, measurements should be saved to RAM disk. From RAM
disk, they can be copied to the internal floppy disk by pressing
Fils Utilities Copy All Filets , or using the SCPI command
MMEM:COPY 'MEM:*.*', 'INT:'
or
MMEM:COPY 'RAM:*.*', 'INT:'
The following mass storage specifiers can be used:
Disk
Non-Volatile RAM Disk
Volatile RAM Disk
Internal 3.5' Disk
The EIes can also be transferred over HP-IR using the SCPI command
MMEM
: TRANsf er. Refer to the "Example Programs" chapter in the
Programmer's Guide for details.
Tel:0755-83589391
Automating Measurements
Saving Measurement Results
name
RAM
: fib
Fax:0755-83539691
( )
SAVE RECALL
7-75
Website: www.Sengt.c