To Activate Markers - HP 8711C User Manual

深圳市盛腾仪器仪表有限公司
1. Press the (Wj key to activate marker 1.
2. lb activate markers 2 through 4, use the softkeys. For example, press
press Edor~ Ma&e~ct and then the softkey that corresponds to the marker
you wish to activate.
3. Each marker, when activated, is either placed at its previous x-axis value,
or at the center of the x-axis.
Active Marker Definition
Although there may be up to eight markers on the display screen at one time, only one marker can
be 'active" at any given time. The active marker is designated by a triangle pointing down f'yj with
the marker number above it. Any other markers on the display are inactive and are designated by
a triangle pointing up I& with the marker number below it. Any marker can be made active by
selecting its corresponding softkey.
The active marker's values are always displayed in the upper right corner of the display screen, and
you can modify the stimulus value of the active marker using the front panel knob, the step keys, or
the numeric keypad.
Tel:0755-83589391
Using Instrument Functions
Fax:0755-83539691
Using Markers
4-5
Website: www.Sengt.c