Installing The Mobilecase; Safety; Setting Up The Mobilecase, Mounting The Tool Table - Fronius Virtual Welding 2.0 Operating Instructions Manual

Hide thumbs Also See for Virtual Welding 2.0:
Table of Contents

Advertisement

Installing the MobileCase

Safety

Danger from electrical current.
This may result in serious injuries or death.
Danger from incorrect installation.
This can result in severe personal injury and damage to property.
Setting up the
MobileCase,
mounting the
tool table
1
2
WARNING!
Before starting work, switch off the device and disconnect it from the mains.
Secure the device to prevent it from being switched back on again.
WARNING!
Observe the information in section
Remove the MobileCase and the tool table from the transport case
Place the MobileCase in the desired position
Setup regulations
from page 31.
39

Advertisement

Table of Contents
loading

Table of Contents