Setting The Shielding Gas Flow Rate For A Gas-Valve Torch; Setting The Shielding Gas Flow Rate For The Ttg 2200 Tcs Torch - Fronius TransPocket 2500 Comfort Operating Instructions Manual

Setting the
shielding gas
flow rate for a
Risk of injury and damage due to electric shock.
gas-valve torch
As soon as the mains switch is in the - I - position, the tungsten electrode in the torch is
LIVE. Make sure that the tungsten electrode does not touch any persons or electrically
conducting or earthed parts (e.g. housing etc.)
1.
2.
Setting the
shielding gas
flow rate for the
Risk of injury and damage due to electric shock.
TTG 2200 TCS
As soon as the mains switch is in the - I - position, the tungsten electrode in the torch is
torch
LIVE. Make sure that the tungsten electrode does not touch any persons or electrically
conducting or earthed parts (e.g. housing etc.)
CAUTION!
Move the mains switch to the - I - position
Open the gas cylinder valve on the torch or press the torch trigger and set the desired
gas flow rate at the pressure regulator
CAUTION!
Move the mains switch to the - I - position
1
The Fronius logo appears on the display for roughly 1 second.
Press and hold the Process button
2
Press the Setup button
3
The power source is now in the Service menu:
Turn the dial to select 'Sol.ValveTest'
4
35