Fax (Fax Test Mode) - Canon MF735C Series Service Manual

FAX (FAX test mode)

■ MODEM
TESTMODE (Service mode for test print, operation check, etc.) > FAX (FAX test mode) > MODEM
RELAY-1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
RELAY-2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
NCU relay test 1
To test ON/OFF of relay and port switch of NCU.
This mode is disabled for an NCU with no relay and port switch.
When analyzing the cause of a problem
Enter the setting value, and then press Apply key.
Be sure to set the value back to 0 after the test.
0 to 6
0: All OFF
1: CML ON/OFF
2: P ON/OFF
3: S ON/OFF
4: H ON/OFF
5: HD ON/OFF
6: R ON/OFF
0
TESTMODE > FAX > MODEM > RELAY-2
NCU relay test 2
To test ON/OFF of relay and port switch of NCU.
This mode is disabled for an NCU with no relay and port switch.
When analyzing the cause of a problem
Enter the setting value, and then press Apply key.
Be sure to set the value back to 0 after the test.
0 to 7
0: All OFF
1: CIST2 ON/OFF
2: C1 ON/OFF
3: NORG ON/OFF
4: DCSEL ON/OFF
5: DCLIM ON/OFF
6: IPSEL1 ON/OFF
7: IPSEL2 ON/OFF
0
TESTMODE > FAX > MODEM > RELAY-1
332
9. Service Mode