Canon MF735C Series Service Manual page 312

COPIER (Service mode for copier) > OPTION (Specification setting mode) > BODY
LOCALE
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
SIZE-LC
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
Setting of location
To set the location.
Set the location in this item and the paper size configuration in SIZE-LC, and then clear the setting
information in ALL.
- When replacing the Main Controller PCB
- When changing the location information
1) Enter the setting value in this item, and then press Apply key.
2) Set the paper size configuration in SIZE-LC.
3) Execute ALL.
4) Turn OFF/ON the main power switch.
The setting information such as user mode and service mode is initialized by executing ALL. The
settings of this item and SIZE-LC are not initialized.
1 to 10
1: Japan
2: North America
3: Korea
4: China
5: Taiwan
6: Europe
7: Asia
8: Oceania
9: Brazil
10: Latin
COPIER> FUNCTION> CLEAR> ALL
COPIER> OPTION> BODY> SIZE-LC
Setting of paper size configuration
To set the paper size configuration.
When replacing the Main Controller PCB, set the location in LOCALE and the paper size
configuration in this item, and then clear the setting information in ALL.
- When replacing the Main Controller PCB
- Upon user's request
1) Set the location in LOCALE.
2) Enter the setting value in this item, and then press Apply key.
3) Execute ALL.
4) Turn OFF/ON the main power switch.
The setting information such as user mode and service mode is initialized by executing ALL. The
settings of this item and LOCALE are not initialized.
1 to 4
1: AB configuration
2: Inch configuration
3: A configuration
4: AB/Inch configuration
COPIER> FUNCTION> CLEAR> ALL
COPIER> OPTION> BODY> LOCALE
303
9. Service Mode