Canon MF735C Series Service Manual page 282

COPIER (Service mode for copier) > ADJUST (Adjustment mode) > CCD
LED-CL-R
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
LED-CL-G
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
LED-CL-B
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
LED2CL-R
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
LED2CL-G
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Scan Unit LED lgt time(R):frt,clr,300dpi
To adjust the lighting time of the red color LED of the Scanner Unit (for front side) in color mode
with 300 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 4096
865
COPIER> FUNCTION> CCD> CL-AGC
Scan Unit LED lgt time(G):frt,clr,300dpi
To adjust the lighting time of the green color LED of the Scanner Unit (for front side) in color mode
with 300 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 4096
865
COPIER> FUNCTION> CCD> CL-AGC
Scan Unit LED lgt time(B):frt,clr,300dpi
To adjust the lighting time of the blue color LED of the Scanner Unit (for front side) in color mode
with 300 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 4096
865
COPIER> FUNCTION> CCD> CL-AGC
Scan Unit LED lgt time(R):frt,clr,600dpi
To adjust the lighting time of the red color LED of the Scanner Unit (for front side) in color mode
with 600 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 4096
1377
COPIER> FUNCTION> CCD> CL-AGC
Scan Unit LED lgt time(G):frt,clr,600dpi
To adjust the lighting time of the green color LED of the Scanner Unit (for front side) in color mode
with 600 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 4096
1377
COPIER> FUNCTION> CCD> CL-AGC
273
9. Service Mode