Canon MF735C Series Service Manual page 318

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
COUNTER2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
COUNTER3
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
COUNTER4
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
COUNTER5
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
COUNTER6
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Setting of software counter 2
To set counter type for software counter 2 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
It differs according to the location.
Setting of software counter 3
To set counter type for software counter 3 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
It differs according to the location.
Setting of software counter 4
To set counter type for software counter 4 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
It differs according to the location.
Setting of software counter 5
To set counter type for software counter 5 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
It differs according to the location.
Setting of software counter 6
To set counter type for software counter 6 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
It differs according to the location.
309
9. Service Mode