Canon MF735C Series Service Manual page 339

TESTMODE (Service mode for test print, operation check, etc.) > PRINT (Print test mode)
DENS-Y
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
DENS-M
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
DENS-C
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
DENS-K
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
SW-Y
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
SW-M
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Adj of Y-color density at test print
To adjust Y-color density when performing test print .
As the value is larger, the image gets darker.
At test print
Enter the setting value, and then press Apply key.
0 to 255
128
TESTMODE> PRINT> PG-TYPE
Adj of M-color density at test print
To adjust M-color density when performing test print .
As the value is larger, the image gets darker.
At test print
Enter the setting value, and then press Apply key.
0 to 255
128
TESTMODE> PRINT> PG-TYPE
Adj of C-color density at test print
To adjust C-color density when performing test print .
As the value is larger, the image gets darker.
At test print
Enter the setting value, and then press Apply key.
0 to 255
128
TESTMODE> PRINT> PG-TYPE
Adj of Bk-color density at test print
To adjust Bk-color density when performing test print .
As the value is larger, the image gets darker.
At test print
Enter the setting value, and then press Apply key.
0 to 255
128
TESTMODE> PRINT> PG-TYPE
ON/OFF of Y-color output at test print
To set whether to output Y-color at the time of test print .
At test print
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
1
TESTMODE> PRINT> PG-TYPE
ON/OFF of M-color output at test print
To set whether to output M-color at the time of test print .
At test print
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
1
330
9. Service Mode