Canon MF735C Series Service Manual page 239

E202-0002---
Detection Description
Remedy
E246-0000---
Detection Description
Remedy
E247-0000---
Detection Description
Remedy
E302-0001---
Detection Description
Remedy
E302-0002---
Detection Description
Remedy
E350-0000---
Detection Description
Remedy
E354-0000---
Detection Description
Remedy
E355-0000---
Detection Description
Remedy
E355-0004---
Detection Description
Remedy
E355-0005---
Detection Description
Remedy
E732-0000---
Detection Description
Remedy
CIS Unit HP error (homeward)
The CIS Unit did not move to HP even it moved forward.
Reader HP Sensor error,
Reader Motor error,
CIS Unit error
1. Replace the Reader HP Sensor.
2. Replace the Reader Motor.
3. Replace the CIS Unit.
4. Replace the Reader Unit.
System error
System error
Contact the sales company.
System error
System error
Contact the sales company.
Shading error
When the light intensity is below the reference level at shading
1. Disconnect and then connect the Flexible Cable.
2. Replace the Flexible Cable.
3. Replace the CIS Unit.
4. Replace the Main Controller PCB (PCB2).
Shading error
Image sampling for shading was not completed.
1. Turn OFF and then ON the main power.
2. Check the connection of the harness.
3. Replace the Main Controller PCB.
4. Replace the Reader Unit.
System error
System error
Contact the sales company.
System error
System error
Contact the sales company.
System error
System error
Contact the sales company.
System error
System error
Contact the sales company.
System error
System error
Contact the sales company.
Scanner communication error
Scanner communication error
1. Install the set of the controller firmware.
2. Replace the Main Controller PCB.
230
8. Error/Jam/Alarm