Menu (Menu Switch Registration Mode); Num (Numeric Parameter Setting Mode) - Canon MF735C Series Service Manual

SSSW No. Bit No.
SW 24
SW 25
Bit 0
SW 26
SW 27
SW 28 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
SW 29
SW 30
SW 31
SW 32

MENU (Menu switch registration mode)

No.
05 Not in use
06 Telephone line monitor
07 Transmission level (ATT)
08 Upper limit of V.34 modulation speed
09 Upper limit of V.34 data speed
10 OFF Hook signal frequency

NUM (Numeric parameter setting mode)

No.
002 RTN transmission criteria X
Not in use
(Setting for report display function)
Prioritize the received abbreviated name to the dialed abbreviated name
Not in use
Not in use
Prohibit calling party for V8 procedure
Prohibit called party from V8 procedure
Prohibit calling party from V8 late-start
Prohibit called party from V8 late-start
Prohibit V.34 called party from starting fallback
Prohibit V.34 calling party from starting fallback
Not in use
Not in use
Not in use
Not in use
Parameter
Parameter
Function
-
0 to 3
0: DIAL
1: SERVICE TECHNICIAN 1
2: SERVICE TECHNICIAN 2
3: OFF
8 to 15
0 to 5
0: 3,429 BAUD
1: 3,200 BAUD
2: 3,000 BAUD
3: 2,800 BAUD
4: 2,743 BAUD
5: 2,400 BAUD
0 to 13
0: 33.6 kbps
1: 31.2 kbps
2: 28.8 kbps
3: 26.4 kbps
4: 24.0 kbps
5: 21.6 kbps
6: 19.2 kbps
7: 16.8 kbps
8: 14.4 kbps
9: 12.0 kbps
10: 9.6 kbps
11: 7.2 kbps
12: 4.8 kbps
13: 2.4 kbps
0 to 2
0: 50 Hz
1: 25 Hz
2: 17 Hz
1 to 99 %
323
9. Service Mode
Selection
Allowable setting range