Canon MF735C Series Service Manual page 340

TESTMODE (Service mode for test print, operation check, etc.) > PRINT (Print test mode)
SW-C
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SW-K
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
MONOMODE
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
FEED
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
START
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
ON/OFF of C-color output at test print
To set whether to output C-color at the time of test print .
At test print
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
1
ON/OFF of Bk-color output at test print
To set whether to output Bk-color at the time of test print .
At test print
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
1
ON/OFF of black mode at test print
To set whether to enable black mode at the time of test print.
At test print
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
0
Setting of paper source at test print
To set the paper source at the time of test print output.
If this mode is set when there is no Cassette 2 (option Pickup Cassette), the output is made from
Cassette 1 (standard Pickup Cassette).
At trouble analysis
Enter the setting value, and then press Apply key.
In case of using the Multi-purpose Tray, be sure to place paper on the tray before executing this
item.
0 to 4
0: Multi-purpose Tray
1: Cassette 1
2: Cassette 2
3: Cassette 3
4: Cassette 4
1
Output of test print
To output a test print with the PG pattern set in PG-TYPE, MODE, etc.
At trouble analysis
Select the item, and then press Yes key.
TESTMODE> PRINT
331
9. Service Mode