Canon MF735C Series Service Manual page 317

■ IMG-MCON
COPIER (Service mode for copier) > OPTION (Specification setting mode) > IMG-MCON
TMIC-BK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
TMIC-CMY
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
■ USER
COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
COUNTER1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
TMIC Bk PASCAL gamma LUT end edge crrct
To set whether to perform the trailing edge correction of Bk-color PASCAL gamma LUT used by
TMIC.
When 1 is set, the trailing edge correction is not performed so that density of the high density area
becomes high. Consequently, texts and thin lines become clear; however, gradation of photos may
become unnatural.
When 0 is set, density of the high density area becomes low by the trailing edge correction.
Consequently, gradation of photos is improved, but thin lines may be partly missing or texts may
be faded.
- When gradation of photos become unnatural
- When thin lines are partly missing or characters are faded
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
1
TMIC: Error diffusion correction of photo/high image quality.
TMIC Y/M/C PASCAL gamma LUT end correct
To set whether to perform the trailing edge correction of Y/M/C-color PASCAL gamma LUT used
by TMIC.
When 1 is set, the trailing edge correction is not performed so that density of the high density area
becomes high. Consequently, texts and thin lines become clear; however, gradation of photos may
become unnatural.
When 0 is set, density of the high density area becomes low by the trailing edge correction.
Consequently, gradation of photos is improved, but thin lines may be partly missing or texts may
be faded.
- When gradation of photos become unnatural
- When thin lines are partly missing or characters are faded
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
1
TMIC: Error diffusion correction of photo/high image quality.
Display of software counter 1
To display counter type for software counter 1 on the Counter Check screen.
Upon user/dealer's request
N/A (Display only)
Display only. No change is available.
0 to 999
0: No registration
It differs according to the location.
308
9. Service Mode