Canon MF735C Series Service Manual page 303

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > MISC-P
CRG-LOG
Detail
Use Case
Adj/Set/Operate Method
■ SYSTEM
COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > SYSTEM
DOWNLOAD
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
PANEL-UP
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
LOGWRITE
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
IMPORT
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
Output cartridge replacement log report
To output the cartridge replacement log in the form of a report.
When checking the cartridge replacement log
Select the item, and then press Yes key.
Upgrading of machine firmware:difference
To upgrade the machine firmware using a USB flash drive.
Compare the versions of firmware in the machine and the USB flash drive, and update the
differences.
At upgrade
1) Connect the USB flash drive.
2) Select the item, and then press Yes key.
The machine restarts in download mode.
Do not turn OFF/ON the power before "Executing..." disappears.
COPIER> FUNCTION> SYSTEM> DL-FORCE
Upgrading of Control Panel CPU PCB firm
To upgrade the firmware of the Control Panel CPU PCB using a USB flash drive.
Upgrading is performed when PANEL exists in the root directory of the USB flash drive.
At upgrade
1. Connect the USB flash drive.
2. Select the item, and then press Yes.
3. Turn OFF/ON the main power.
Do not turn OFF/ON the power before "Executing..." disappears.
COPIER> DISPLAY> VERSION> PANEL
Writing sublog to USB flash drive
To write sublog that includes the following information to the USB flash drive.
- Job list (job names, user names, and destinations)
- Communications log (destinations and user names)
- Job log (user names and job names)
When analyzing the cause of a problem
1. Connect the USB flash drive.
2. Select the item, and then press Yes.
3. Turn OFF/ON the main power.
Do not turn OFF/ON the power before "Executing..." disappears.
COPIER> FUNCTION> SYSTEM> LOG2USB
Read s-mode set VL from USB flash drive
To read the service mode setting information (excluding those related to Reader/DADF, but
including those related to Finisher) from the USB flash drive.
When replacing the Main Controller PCB
1. Connect the USB flash drive.
2. Select the item, and then press Yes.
3. Turn OFF/ON the main power.
Do not turn OFF/ON the power before "Executing..." disappears.
COPIER> FUNCTION> SYSTEM> EXPORT
294
9. Service Mode