Canon MF735C Series Service Manual page 313

COPIER (Service mode for copier) > OPTION (Specification setting mode) > BODY
MIBCOUNT
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
NS-CMD5
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
NS-PLN
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
NS-LGN
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
Set of charge counter MIB scope range
To set the range of counter information that can be obtained as MIB (Management Information
Base).
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 2
0: All charge counters are obtained
1: Only displayed counter* is obtained
2: All charge counters are not obtained
* : Counter specified by COUNTER 1 to 6
0
COPIER> OPTION> USER> COUNTER1 - 6
Limit CRAM-MD5 auth method: SMTP auth
To restrict use of CRAM-MD5 authentication method at the time of SMTP authentication.
Upon user's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent
1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
Limit plaintext auth: SMTP auth, noencry
To restrict use of PLAIN/LOGIN authentication, which is plaintext, at the time of SMTP
authentication under the environment where the communication packet is not encrypted.
Upon user's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent
1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
Limit LOGIN authentication: SMTP auth
To restrict use of LOGIN authentication at the time of SMTP authentication.
Upon user's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent
1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
304
9. Service Mode