Canon MF735C Series Service Manual page 302

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > MISC-R
1PCLBRST
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
■ MISC-P
COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > MISC-P
SRVC-DAT
Detail
Adj/Set/Operate Method
Supplement/Memo
SYS-DAT
Detail
Adj/Set/Operate Method
Supplement/Memo
SYS-DMP
Detail
Adj/Set/Operate Method
Supplement/Memo
CNTR
Detail
Adj/Set/Operate Method
ERR-LOG
Detail
Adj/Set/Operate Method
SPEC
Detail
Adj/Set/Operate Method
ERDS-LOG
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
Supplement/Memo
Init frt/bck clr difference calibration
To initialize the correction result of calibration of color difference between the front and back sides.
Execute this item when color difference is not corrected appropriately even though 1PSCLB-A/B
is executed.
When the calibration result is not appropriate
Select the item, and then press Yes key.
COPIER> FUNCTION> MISC-R> 1PSCLB-A/B
Output system data list/system dump list
To output the system data list and the system dump list in the form of a report.
System data list: The service software switches and parameters used in FAX function
System dump list: The number of sends/receives, the number of pages sent/received, the number
of sheets printed/read, the number of errors, etc.
Select the item, and then press Yes key.
FAX model only
Output of system data list
To output the system data list in the form of a report.
The service software switches and parameters used in FAX function are output.
Select the item, and then press Yes key.
FAX model only
Output of system dump list
To output the system dump list in the form of a report.
The number of sends/receives, the number of pages sent/received, the number of sheets printed/
read, the number of errors, etc. are output.
Select the item, and then press Yes key.
FAX model only
Output of counter report
To output the counter values in the form of a report.
The usage of functions (reading, recording, communication and copy) is output.
Select the item, and then press Yes key.
Output of error log report
To output the error log in the form of a report.
Select the item, and then press Yes key.
Output of spec report
To output the specifications in the form of a report.
The current device specifications such as the location, model information, and ROM version are
output.
Select the item, and then press Yes key.
Output of Embedded-RDS log report
To output the log relating to Embedded-RDS in the form of a report.
The date, time, and code (8 digits) of each error that occurred are output.
When using Embedded-RDS
Select the item, and then press Yes key.
COPIER> FUNCTION> INSTALL> COM-LOG
Embedded-RDS: Function to send device information such as the device counter, failure, and
consumables to UGW via SOAP protocol
UGW (Universal Gate Way): Remote monitoring service system
293
9. Service Mode