Canon MF735C Series Service Manual page 280

COPIER (Service mode for copier) > ADJUST (Adjustment mode) > CCD
GA-BW0BK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
GA2BW0BK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
GA-CL0BK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
GA2CL0BK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
LED-BW-R
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Adj Img Read Sns 1 gain: bck,B&W,300dpi
To adjust the gain of the Image Reading Sensor 1 (Rear) of the Scanner Unit (for back side) in
black mode with 300 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 255
0
COPIER> FUNCTION> CCD> BW-AGC2
Adj Img Read Sns 1 gain: bck,B&W,600dpi
To adjust the gain of the Image Reading Sensor 1 (Rear) of the Scanner Unit (for back side) in
black mode with 600 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 255
0
COPIER> FUNCTION> CCD> BW-AGC2
Adj Img Read Sns 1 gain: bck,clr,300dpi
To adjust the gain of the Image Reading Sensor 1 (Rear) of the Scanner Unit (for back side) in
color mode with 300 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 255
0
COPIER> FUNCTION> CCD> CL-AGC2
Adj Img Read Sns 1 gain: bck,clr,600dpi
To adjust the gain of the Image Reading Sensor 1 (Rear) of the Scanner Unit (for back side) in
color mode with 600 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 255
0
COPIER> FUNCTION> CCD> CL-AGC2
Scan Unit LED lgt time(R):frt,B&W,300dpi
To adjust the lighting time of the red color LED of the Scanner Unit (for front side) in black mode
with 300 dpi.
When replacing the Main Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Main Controller PCB/clearing RAM data
Enter the setting value, and then press Apply key.
0 to 4096
609
COPIER> FUNCTION> CCD> BW-AGC
271
9. Service Mode