Canon MF735C Series Service Manual page 320

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
PS-MODE
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SMD-EXPT
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
ACC-SLP
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
RPL-IMP
Detail
Use Case
Display/Adj/Set Range
Default Value
Supplement/Memo
Setting of compatible mode at PS usage
To set the image processing at PS print.
Set 8 when line width differs depending on the drawing position although the same line width is
set.
Setting of a value other than the setting values means that multiple settings are combined.
(Example: 12=4+8)
Upon user's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 63
4: Compatible with EFI at PS 2-sided delivery
8: strokeadjustment is enabled
Any value other than those mentioned above: Not used
0
Set of service mode set VL export target
To set whether to export "service mode data" from remote UI.
When 1 is set, "service mode data" is displayed as the target data of export on remote UI. When
installing more than 1 machine at the same time, the same service mode data can be registered.
When installing more than 1 machine at the same time
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Not targeted
1: Targeted
0
If selecting "service mode data" as the target data of export on remote UI after setting SMD-EXPT
to 1, service mode data can be exported.
Set shift to sleep3: Card Reader connect
To set whether to shift to sleep mode 3 when the Card Reader is connected.
Enter the setting value, and then press Apply key.
0 to 1
0: Not shifted
1: Shifted
1
ON/OFF of replacement mode
To set whether to import the setting information of a machine which has been exported to a different
one of the same model using DCM function.
When 0 is set, the setting information which has been exported can be imported only to the same
machine.
When 1 is set, the machine-specific setting information such as IPv4 address setting can be
imported to a different machine.
When migrating the setting of a machine to a different machine of the same series that has been
replaced
0 to 1
0: OFF, 1: ON
0
DCM (Device Configuration Management): A function to export/import the machine's setting
information as a file.
311
9. Service Mode