Canon MF735C Series Service Manual page 378

Replace
Initializ-
Data Location
Initialize
ing Key
Engine Main
All Data /
and Cer-
Control- Control-
Settings
tificate
ler PCB ler PCB
Service Engine Clear - - -
mode Control-
setting ler PCB
values
(DC Con-
troller)
Password
System Main - Clear*4 Clear*4 -
Adminis- Control-
trator ler PCB
pass-
word
Security Main - Clear Clear -
Policy Control-
Adminis- ler PCB
trator
pass-
word
Service Main - Clear Clear -
Mode Control-
pass- ler PCB
word*12
*1. The factory adjustment values of the Reader and ADF are initialized.
*2. Service data (Except "COPIER > COUNTER" and "COPIER > FEED-ADJ") are cleared. The factory adjustment values of the Reader and ADF are not initialized.
*3. Service data is cleared. User data is not cleared. The factory adjustment values of the Reader and ADF are not initialized.
*4. In the counter meter-installed model: The user data and service data and each history and the settings of the system administrator are cleared. (The system manager ID and password are changed back to the default values ID: 7654321/PWD: 7654321)
The factory adjustment values of the Reader and ADF are not initialized.
*5. COPIER > FUNCTION > SYSTEM > IMPORT / COPIER > FUNCTION > SYSTEM > EXPORT
*6. Settings/Registration >Management Settings >Data Management > Import/Export
*7. Settings Manu > Management Settings > Data Management > Import/Export
*8. COPIER > FUNCTION > VIFFNC > STOR-DCN
*9. Except "Preferences > Network Settings"
*10. Clear only an item of the "Preferences > Network Settings".
*11. Because the settings of the "System Manager ID and PIN" are cleared, set "System Manager ID and PIN" again.
*12. COPIER > OPTION > BODY > SM-PSWD(Setup password by SM-PSWD)
Menu > System Management Settings
Menu Clear
Initializ-
ing Ad-
Manage-
Preferen- Function Set Desti- Network
dress
ment Set-
ces Settings nation Settings
Book
tings
- - - - - -
- - - - Clear*4 -
- - - - Clear -
- - - - - -
Delete
Service Mode > COPIER > FUNCTION >
CLEAR
"SRVC- COUN-
Clear All R-CON *1 HIST *3 ALL
DAT*2" TER
- - - - - -
Clear*4 - - - - Clear*4
Clear - - - - Clear
- - - - - -
369
Backup by User
SPLMAN
Location
PLPW- SPL4381
DC-CON Yes/No Method to be
CLR 0
stored
- Clear - Yes Remote PC, USB
UI *6 memory
LUI *7
- - Clear*11 No - -
Clear - - No - -
- - - No - -
Backup Data List
Backup by Service
Location
Yes/No Method to be
stored
Yes Service USB
mode*5 memory /
*8 Main
Control-
ler
No - -
No - -
No - -