Canon MF735C Series Service Manual page 308

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > SPLMAN
SPL84194
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
SPL32620
Detail
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
SPL60061
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
SPL71700
Detail
Use Case
Adj/Set/Operate Method
SPL01734
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
SPL39533
Detail
Use Case
Adj/Set/Operate Method
ON/OFF of Embedded-RDS
To set ON/OFF of Embedded-RDS function.
When using Embedded-RDS
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 1
0: ON, 1: OFF
It differs according to the location.
Embedded-RDS: Function to send device information such as the device counter, failure, and
consumables to UGW via SOAP protocol
UGW (Universal Gate Way): Remote monitoring service system
ON/OFF of PC-less update function
To set whether to disable the PC-less update function.
1) Enter the setting value, and then press Apply key.
2) Turn OFF / ON the main power switch.
When LCDSFLG is 1, the setting of this item is disabled (the PC-less update function is turned
OFF).
0 to 1
0: OFF, 1: ON
1
COPIER> OPTION> FNC-SW> LCDSFLG
PC-less update: A function to directly download the firmware from the GDLS server and update it.
Dspl/hide cloud print connct dest URL chng scrn
To set whether to display or hide the connection destination URL settings for Google Cloud Print
on remote UI.
When Google has changed the connection destination URL for cloud print
1) Enter the setting value, and then press Apply key.
2) Turn OFF / ON the main power switch.
0 to 1
0: Display
1: Hide
Writing sublog to USB flash drive
To write the sublog stored in the eMMC PCB to the USB flash drive.
When analyzing the cause of a problem
Select the item, and then press Yes key.
ON/OFF of remote UI service mode
To set whether to allow using service mode on remote UI.
When using service mode on remote UI
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
The setting value is linked with that of RMT-SW.
0 to 1
0: OFF, 1: ON
1
COPIER> OPTION> BODY> RMT-SW
ON/OFF of department ID management
To set whether to disable the department ID management.
When disabling the department ID management
Select the item, and then press Yes key.
299
9. Service Mode