Canon MF735C Series Service Manual page 309

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > SPLMAN
SPL43810
Detail
Use Case
Adj/Set/Operate Method
Caution
SPL08159
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SPL97097
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
■ VIFFNC
COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > VIFFNC
SMEAR-PV
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
FEED-IMP
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Clear of system administrator settings
To completely delete the following setting information.
- System Manager ID
- PIN
After clearing of the information, it is necessary to set the system manager ID/PIN again.
When the system manager ID/PIN has been forgotten
Select the item, and then press Yes key.
Do not forget to set the system manager ID/PIN after clearing of the information.
ON/OFF of fax image backup data clear
To set whether to clear the fax image data which has been backed up.
When 1 is set, it is cleared at next startup.
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
0
ON/OFF of user setting backup data clear
To set whether to clear all the user setting data which has been backed up.
When 1 is set, it is cleared at next startup.
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
1
ON/OFF of image smear prevention mode
To set whether to execute the image smear prevention mode.
Depending on the paper type or environment (especially in a high humidity environment), thin line
or fine halftone may become lighter
When thin line or fine halftone becomes lighter
Enter the setting value, and then press Apply key.
0 to 1
0: OFF, 1: ON
0
ON/OFF of pickup jam reduction mode
To set whether to execute the pickup jam reduction mode.
When using paper with which double feed is more likely to occur, pickup operation cannot be
performed at the appropriate timing because of double feed. As a result of that, pickup delay jam
may occur.
In such cases, the pickup interval is extended by setting 1. As a result of that, jam occurrence can
be reduced, but productivity is decreased.
When pickup jam occurs with paper with which double feed is more likely to occur
Enter the setting value, and then press Apply key.
Be sure to get approval from the user by telling that the productivity decreases to prevent jam
occurrence.
0 to 1
0: OFF, 1: ON
0
300
9. Service Mode