Copy Card Reader-F1
Points to Note at Installation
The Copy Card Reader Attachment is required for the
installation of the equipment.
The following options cannot be used in combination with this
equipment.
• MiCARD Attachment Kit + IC-Card Reader that is a sales
company's option
• Copy Control Interface Kit
Installation Outline Drawing
Checking the Contents
<Copy Card Reader-F1>
1x
RS Tightening; M4x10
1x
1x
351
<Copy Card Reader Attachment-J1>
1x
1x
2x
TP; M3x6
3x
1x
Check Item When Turning OFF
the Main Power
Check that the main power is OFF.
1. Turn OFF the main power switch.
2. Check that the display in the Control Panel and the
lamp of the main power are turned off, and then
disconnect the power plug.
10. Installation
1x
1x
3x
1x
RS Tightening;
M4x10
1x
1x