Table of Contents
Advertisement
In the
Gas sensor settings
menu you can
• select
Gas sensor
ON and OFF.
• adjust
Gas flow sensing level
by using the slider bar.
• select
Gas
type.
• select Gas valve type from the drop-down menu.
• select Argon,
Carbon
Dioxide, Nitrogen, Oxygen,
concentration in a
Gas
mixture.
In the
General robot settings
menu you can
• select
Interface mode
for the digital robot interface in the selection box.
• adjust
Voltage scaling
by using the slider bar.
• adjust
Wire feed speed scaling
• adjust
Current scaling
by using the slider bar.
• select
Simulation mode
by OFF, ON or SELECT AT ROBOT by clicking on the
buttons.
• select
Gun type
from the drop-down menu.
In the
Touch sensor settings
menu you can
• select
Output voltage
from the drop-down menu.
• select
Touch tool
WELDING WIRE, GAS NOZZLE or SELECT AT ROBOT by clicking
on the buttons.
• select
Fast output polarity
LOW-ACTIVE or HIGH-ACTIVE by clicking on the
buttons.
Hydrogen
and
Helium
by using the slider bar.
© Kemppi Oy 2017
In the
Collision sensor settings
menu you can
• select
Collision sensor
ON and OFF by clicking on the buttons.
• select
Switch type
OPENING or CLOSING by clicking on the buttons.
• select
Output polarity
LOW-ACTIVE or HIGH-ACTIVE by clicking on the buttons.
In the
Emergency stop settings
menu you can
• select
Emergency stop
ON and OFF by clicking on the buttons.
• select
Gate door switch
ON and OFF by clicking on the buttons.
• select
Switch type
for the emergency stop and the gate door switch by clicking
on the buttons.
• select
Line level
for the emergency stop and the gate door switch by clicking on
the buttons.
In the
Welding system time
menu you can set the welding system time and date
automatically or manually by clicking on the buttons.
•
Set
automatically: The current time and date of the web browser are used.
•
Set
manually: Before clicking on the button, specify the date and time in the
Welding system time
edit box.
33
A7 MIG Welder
1735
Advertisement
Table of Contents
