User Interfaces - Kemppi A7 MIG Welder 350 Operating Manual

3.3 User interfaces

The A7 MIG Welder system has two integrated user
interfaces with system setup and control capability, a
setup panel and a web user interface.
The web user interface is mandatory for configuring
the fieldbus. The fieldbus configuration functionality is not
available in the setup panel. The fieldbus configuration is
described in the A7 MIG Welder Integration
Setup panel
7
1
8 3
2
6 6
Figure 14 Setup panel layout
1. Power button
2. Memory channel selector (-/+)
3. MENU entry button
4. Up / down arrows
5. Control knob
6. Menu shortcut keys
7. LCD display
8. Soft key buttons
The setup panel has a menu display, soft buttons and a
control knob for easy navigation and control. See
4.2, "Setup panel" for details.
Web user interface
guide.
5
8
4
Figure 3.5 Web user interface layout overview
1. Side menu bar
2. Content frame
6
3. Current user / User logout
4. Setup parameters
5. Setup value controls
6. Pop-up bar (normally hidden)
The web user interface is a website that is located in
a network server in the robot interface unit. It can be
accessed by any internet browser that is capable of
showing dynamic web pages. The web user interface
can be used for controlling the welding system and all its
setup parameters. See
details.
Section
© Kemppi Oy 2017
1 3
2
4 5
6
Section 4.3, "Web user interface"
8
A7 MIG Welder
for
1735