Introduction - Kemppi A7 MIG Welder 350 Operating Manual

1.

INTRODUCTION

Congratulations on choosing the A7 MIG Welder system.
When used correctly, Kemppi products can significantly
increase the productivity of your welding, and provide
years of economical service.
This operating manual contains important information on
the use, maintenance and safety of your Kemppi product.
The technical specifications of the equipment can be
found at the end of the manual.
Please read the manual carefully before using the
equipment for the first time. For your own safety and that
of your working environment, pay particular attention to
the safety instructions in the manual.
For more information on Kemppi products, contact
Kemppi Oy, consult an authorized Kemppi dealer, or visit
the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to
change without prior notice.
Important notes
Items in the manual that require particular attention in
order to minimize damage and harm are indicated by the
symbols below. Read these sections carefully and follow
their instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in
damage to the equipment or system.
Warning: Describes a potentially dangerous situation.
If not avoided, it will result in personal damage or fatal
injury.
Disclaimer
While every effort has been made to ensure that the
information contained in this guide is accurate and
complete, no liability can be accepted for any errors
or omissions. Kemppi reserves the right to change the
specification of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit
the contents of this guide without prior permission from
Kemppi.
The web user interface server, located in the robot
interface unit, is meant to be used only in point-to-point
connection with one authorized PC computer. For the sake
of confidentiality, it is not recommended to connect the
A7 MIG Welder system to any public or internal network.
Kemppi is not liable for errors or damages resulting from
non-compliance of this recommendation.
© Kemppi Oy 2017
4
A7 MIG Welder 1735