Deleting A User; Changing User Role; Changing Username; Changing Pin Code - Kemppi A7 MIG Welder 350 Operating Manual

4.4.4 Deleting a user

administrator
Deleting a user requires
Welders and supervisors cannot delete users. At least
one administrator account is required in the system. You
cannot delete your own account.
Setup panel
Go to the Main menu > User settings
PIN code to access the User settings menu. Go to the
activation and select the user you want to delete. Switch
the user to Disabled and press the Set
is now deleted and the account released for further use.
Web user interface
Go to the Settings > Users page. The user identification
system must be turned on to access user settings. Users
have a Delete button in their user account. Press the
button to delete a user. A confirmation dialog with
and Cancel buttons appears. Press the
on the dialog. The user is now deleted and the account
released for new user.

4.4.5 Changing user role

privileges.
When a new user is created in the web user interface, the
user role is specified for the user in the same view. When
a new user is created in the setup panel, the default role
is Welder. The role can be changed afterwards. Changing
a user role requires
Setup panel
and provide your
User Go to the Main menu >User
PIN code to access the
button. The user user rights and select the user whose role you want to
change.
You cannot change your own role.
Select the role and press the
settings.
Web user interface
Delete
Delete button Go to the Settings > Users
system must be turned on to access user settings. Press
the orange arrow
options. Select the role for the user by clicking on the
Welder, Supervisor
dialog with Save
at the bottom. Click the
© Kemppi Oy 2017
administrator privileges.
settings and provide your
User settings menu. Go to the Set
Set button to save the
page. The user identification
> to left of the user icon to see the user
or Administrator buttons. A pop-up
and Reset changes buttons will appear
Save button to save the settings.
39
A7 MIG Welder

4.4.6 Changing username

Usernames can be configured in the web user interface.
The setup panel does not have this functionality.
Changing a username requires administrator
The user identification system must be turned on to
access user settings.
Go to the Settings > Users page. Click on the username
you want to change and retype the name. A pop-up
dialog with Save and Reset changes buttons will appear
at the bottom. Click the Save button to save the settings.

4.4.7 Changing PIN code

By default, the PIN code for each user is 0000 (four zeroes).
Users can protect their user accounts by personalizing
this code. In order to change the PIN code, the user
identification system must be turned on.
Setup panel
Go to Main menu > User settings and provide your PIN
code to access the User settings menu. Go to
PIN code and specify the new PIN code digit by digit. Go
to the next digit by pressing the Next
fourth digit press the OK button to save the settings. The
PIN code is now changed.
Web user interface
Go to the Settings > Change PIN page. On the page, enter
the old PIN code in the first box and the new PIN code
twice in the boxes below. Press the Change PIN
The PIN code is now changed.
privileges.
Change
button. After the
button.
1735