Settings - Network; Settings - Fieldbus - Kemppi A7 MIG Welder 350 Operating Manual

4.3.9 Settings – Fieldbus
Figure 4.15 Settings – Fieldbus view
In the Fieldbus view you can identify the fieldbus, view
the fieldbus specific information and set the configuration
values. The available information and configuration
parameters depend on the fieldbus type. See the
Welder Integration guide for more information.
Accessing this view requires administrator or service
supervisor rights.
Changing the fieldbus settings affects the
communication between the welder system and the robot.
4.3.10 Settings – Network
Figure 4.16 Settings – Network view
In the Network menu you can configure the network
settings of the web user interface server. See the
Welder Integration guide for more information about the
A7 MIG network configuration.
Accessing this view requires administrator or service
supervisor rights.
Changing the network settings affects your access to
the web user interface.
35
© Kemppi Oy 2017
A7 MIG
A7 MIG Welder 1735