Disposal; Ordering Numbers - Kemppi A7 MIG Welder 350 Operating Manual

8.

DISPOSAL

Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment, and its
implementation in accordance with national law,
electrical equipment that has reached the end of its life
must be collected separately and taken to an appropriate
environmentally-responsible recycling facility.
The owner of the equipment is obliged to deliver a
decommissioned unit to a regional collection center,
as per the instructions of local authorities or a Kemppi
representative. By applying this European Directive you
will improve the environment and human health.
9.

ORDERING NUMBERS

Code Product
6203500 A7 MIG WIRE FEEDER 25-LH-EUR
6203501 A7 MIG WIRE FEEDER 25-LH-PP
6203502 A7 MIG WIRE FEEDER 25-RH-EUR
6203503 A7 MIG WIRE FEEDER 25-RH-PP
6201450 A7 MIG POWER SOURCE 450
6201350 A7 MIG POWER SOURCE 350
6260458 ROBOT 70-5-GH CABLE SHOE
6260459 ROBOT 70-5-WH CABLE SHOE
6260449 ROBOT 70-10-GH CABLE SHOE
6260460 ROBOT 70-10-WH CABLE SHOE
6260480 ROBOT 70-20-GH CABLE SHOE
6260481 ROBOT 70-20-WH CABLE SHOE
6203520 A7 I/O DEVICE
SP800873 A7 I/O DEVICE EXTENSION CARD
6185485 A7 CONTROL CABLE 5 M
61854851 A7 CONTROL CABLE 10 M
61854852 A7 CONTROL CABLE 15 M
61854853 A7 CONTROL CABLE 20 M
6185486 A7 CONTROL CABLE EXTENSION 5 M
61854861 A7 CONTROL CABLE EXTENSION 10 M
9774121DEV ANYBUS-CC M30 DEVICENET
9774121DEV12 ANYBUS-CC M30 DEVICENET M12
9774121ETH ANYBUS-CC M30 ETHERNET/IP
9774121ETH2 ANYBUS-CC M30 ETHERNET/IP 2-PORT
9774121ETC ANYBUS-CC M30 ETHERCAT
9774121PRF ANYBUS-CC M30 PROFIBUS
9774121PRN ANYBUS-CC M30 PROFINET IO
9774121PRN2 ANYBUS-CC M30 PROFINET IO 2-PORT
9774121MBR ANYBUS-CC M30 MODBUS-RTU
9774121MBT ANYBUS-CC M30 MODBUS-TCP
9774121MBT2 ANYBUS-CC M30 MODBUS-TCP 2-PORT
62
© Kemppi Oy 2017
Wire feeder, left handed, euro -connector
Wire feeder, left handed, power pin -connector
Wire feeder, right handed, euro -connector
Wire feeder, right handed, power pin -connector
Welding power source, 450 A
Welding power source, 350 A
Interconnection cable set, 5 meters, air cooled
Interconnection cable set, 5 meters, water cooled
Interconnection cable set, 10 meters, air cooled
Interconnection cable set, 10 meters, water cooled
Interconnection cable set, 20 meters, air cooled
Interconnection cable set, 20 meters, water cooled
I/O device, 4 inputs, 4 outputs
Extension card for I/O Device, +4 inputs, +4 outputs
Control cable, 5 meters
Control cable, 10 meters
Control cable, 15 meters
Control cable, 20 meters
Control cable extension, 5 m
Control cable extension, 10 m
DeviceNet fieldbus adapter
DeviceNet fieldbus adapter, M12 connectors
EtherNet/IP fieldbus adapter, 1-port version
EtherNet/IP fieldbus adapter, 2-port version
EtherCAT fieldbus adapter
PROFIBUS fieldbus adapter
PROFINET IO fieldbus adapter, 1-port version
PROFINET IO fieldbus adapter, 2-port version
Modbus-RTU fieldbus adapter
Modbus-TCP fieldbus adapter, 1-port version
Modbus-TCP fieldbus adapter, 2-port version
A7 MIG Welder 1735