Table of Contents
Advertisement
4.2.2 Main menu
Main menu list
Menu item
Description
1/8
Edit channel
Open a memory channel wizard and create, modify and delete
memory channels.
2/8
User settings
Select, add, edit and delete users (requires login). See
identification"
for more information.
3/8
Weld data
Check the values of the last weld.
4/8
System config
Configure the welding system and view device information.
menu
5/8
Language
Select the menu language.
6/8
Select feeder
Select another parallel wire feeder for setup.
(WF#)
7/8
Test menu
Test system devices.
8/8
Robot menu
Configure the robot interface and devices for automated welding.
Section 4.4 "User
16
© Kemppi Oy 2017
4.2.3 Memory channel wizard
For further information about the available welding programs, modified processes,
Match™ functions and the special enhanced arc performance solution, see the wire
feeder's operating manual or the Kemppi website at www.kemppi.com.
Edit channel (Main menu 1/8)
Menu item
Value range
Select channel
Edit channel
0 - 199
New channel (displayed when the selected channel is empty)
Menu item
Value range
1/2
Create new
1. Choose process
MIG,
1-MIG,
Pulse MIG,
Double pulse
MIG, WiseRoot+,
WiseThin+,
Curve number
list
2. Choose group
*
3. Choose material
*
*
4. Choose diameter
5. Choose gas
*
Choose curve
*
A7 MIG Welder
Description
Select which memory channel to edit,
create or delete. The text below the
selection shows whether the channel is
empty or not.
Description
Create a new memory channel by
selecting the welding curve and
specifying welding functions and
welding parameters. After saving the
curve selection, the welding parameter
setup is opened automatically.
Select one of the processes for step-by-
step curve selection, or go to the curve
number list to select the welding curve
directly by its number. In the step-by-
step selection the curve list is filtered
by each selection to make the curve
selection easier.
Select the group of the base material.
Select the base material.
Select the filler wire diameter.
Select the shielding gas type.
Choose the curve from the list filtered by
the process, material, wire diameter and
shielding gas selections.
1735
Advertisement
Table of Contents
