Mig Guns - Kemppi A7 MIG Welder 350 Operating Manual

3.5 MIG Guns

A7 MIG Gun 500-g
2
1
5
Figure 3.10 A7 MIG Gun 500-g
1. Torch neck
2. Connection module
3. Hose assembly
4. Welding gun connector
5. Robot mount
The A7 MIG Gun 500-g is used in gas welding using inert
gases (MIG) or active gases (MAG). This model is gas-
cooled and can be used in all welding positions.
A7 MIG Welding Gun 500-w
3
4
Figure 3.11 A7 MIG Gun 500-w
1. Torch neck
2. Hose assembly
3. Robot mount
4. Fastener
The A7 MIG Gun 500-w is used in gas welding using inert
gases (MIG) or active gases (MAG). This model is water-
cooled and can be used in all welding positions.
© Kemppi Oy 2017
4
1
2
3
11
A7 MIG Welder
Robot mounts
The A7 MIG Gun 500-w and 500-g are mounted to the
welding robot using special robot mounts. There are three
types of robot mounts available: robot mount Type 1, Type
2 and Type 3.
Figure 3.12 Robot mount T1
The robot mount Type 1 serves for accommodating a
welding gun in exact position. The mount is fastened to
the robot with a cylinder head screws and a robot flange.
Figure 3.13 Robot mount T2
The robot mount Type 2 is used for connecting the robot
and the welding gun. The device acts three-dimensionally
and is adaptable to all types of robots and for handling
machines via a robot flange.
1735