Table of Contents
Advertisement
2/2
Copy from CH...
Copy from CH
0 - 199
*
The content of the list depends on the available curves and the selections in the
previous steps.
Create a new memory channel by
making a copy from an existing one.
Select the channel where to make the
copy from.
© Kemppi Oy 2017
Edit channel (displayed when the selected channel is not empty)
Menu item
Value range
1/6
Select weld curve
2/6
Welding parameters
*
*
3/6
Welding functions
*
4/6
Advanced functions
5/6
Copy channel to...
Copy channel to
0 - 199
6/6
Erase channel
*
See the tables
Welding parameters
17
A7 MIG Welder
Description
Change the weld curve. The curve
selection follows the same method as
when creating a new channel.
Select welding parameters, like wire feed
speed and fine tuning. The list of the
available welding parameters depends on
the selected welding process.
Select welding functions, like hot start,
creep start and crater fill.
Select advanced welding functions, like
WiseFusion and WisePenetration.
Make a copy from this memory channel to
another channel.
Select the channel number where to make
the copy. Note that making the copy
to a non-empty channel overwrites the
channel data without confirmation.
Make this channel empty by erasing all
data from the channel.
and
Welding functions
for more information.
1735
Advertisement
Table of Contents
