Parameter
Pulse frequency
* Auto Pulse mode has different parameter values and they cannot be adjusted.
"Welding processes and features" on page 75
3.2.3 Settings
The contents of the Settings menu depend on the welding process, current mode and welding mode selected.
To select and adjust parameters in Settings menu:
1.
Press the parameter settings button (10) to enter the menu.
2.
Browse through the menu parameters by turning the control knob (1).
3.
Select a parameter for adjustment by pressing the control knob button (1).
4.
Adjust the selected parameter by turning the control knob (1).
5.
Close the parameter setting by pressing the control knob button (1).
To enter advanced Settings menu:
Press the Settings button (10) for 5 seconds.
Rarely used settings items are hidden by default. Those are available in the advanced settings menu.
© Kemppi
Value
(AC): 0.2 Hz ... 20 Hz, 1 Hz step (0.2 Hz ... 10
Hz step is 0.1 Hz) (Default = 1 Hz) *
32
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
Note
1920900 / 2215