Table of Contents
Advertisement
Welding parameters
Welding parameters for MIG process (Edit channel 2/6)
Menu item
Value range
1/7
WFSpeed
WFS min -
WFS max
2/7
WFS max
0.7 - 25.0 m/min
*
*
3/7
WFS min
0.7 - 25.0 m/min
4/7
Voltage
Voltage min -
Voltage max
*
5/7
Voltage max 8.0 - 50.0 V
6/7
Voltage min
8.0 - 50.0 V
*
7/7
Dynamics
-9 ... +9
*
These are system limits. Actual limits come from the selected welding curve.
Default value
Description
From curve
Set the wire feed speed in
0.05 m/min steps from 0.5 to
5.0 m/min and in 0.1 m/min
steps above 5.0 m/min.
From curve
Set the upper limit for the
WFSpeed value.
From curve
Set the lower limit for the
WFSpeed value.
From curve
Set the welding voltage (arc
length).
From curve
Set the upper limit for the
Voltage value.
From curve
Set the lower limit for the
Voltage value.
0
Control the arc behavior in
short circuit. Lower value
results to softer and higher
value to rougher arc.
© Kemppi Oy 2017
Welding parameters for 1-MIG process (Edit channel 2/6)
Menu item
Value range
1/7
WFSpeed
WFS min -
WFS max
2/7
WFS max
0.7 - 25.0 m/min
3/7
WFS min
0.7 - 25.0 m/min
4/7
FineTuning
FineTuningMin -
FineTuningMax
5/7
FineTuningMax
-9.0 ... +9.0
6/7
FineTuningMin
-9.0 ... +9.0
7/7
Dynamics
-9 ... +9
*
These are system limits. Actual limits come from the selected welding curve.
18
A7 MIG Welder
Default value
Description
From curve
Set the wire feed speed
in 0.05 m/min steps from
0.5 to 5.0 m/min and in
0.1 m/min steps above 5.0
m/min.
*
From curve
Set the upper limit for the
WFSpeed value.
*
From curve
Set the lower limit for the
WFSpeed value.
0
Adjust the welding
voltage (arc length) of
the welding curve up and
down (0 = no adjustment).
+9.0
Set the upper limit for the
FineTuning value.
-9.0
Set the lower limit for the
FineTuning value.
0
Control the arc behavior
in short circuit. A lower
value results in a softer arc
and a higher value results
in a rougher arc.
1735
Advertisement
Table of Contents
