Events; Configuration - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

5.5.8

Events

5.5.8.1

Configuration

Selecting system events
On this page, you specify how a device reacts to system events. By enabling the appropriate
options, you specify how the device reacts to events. To enable or disable the options, click
the relevant check boxes of the columns.
Description
With Table 1, you can enable or disable all check boxes of a column of Table 2 at once.
Table 1 has the following columns:
● All Events
Shows that the settings are valid for all events of table 2.
● E-Mail / Trap / Log Table / Syslog / Fault
Enable or disable the required type of notification for all events. If "No Change" is
selected, the entries of the corresponding column in Table 2 remain unchanged.
● Copy to Table
If you click the button, the setting is adopted for all events of table 2.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
Configuring with Web Based Management
5.5 "System" menu
127