Chapter 3
Device Management
•
Section 3.9.3.3, "Deleting an RMON Event"
Section 3.9.3.1
Viewing a List of RMON Events
To view a list of RMON events, navigate to Ethernet Stats » Configure RMON Events . The RMON Events table
appears.
Figure 37: RMON Events Table
If events have not been configured, add events as needed. For more information, refer to
"Adding an RMON Event"
Section 3.9.3.2
Adding an RMON Event
To add an RMON alarm, do the following:
Navigate to Ethernet Stats » Configure RMON Events . The RMON Events table appears.
1.
1
Figure 38: RMON Events Table
1. InsertRecord
2.
Click InsertRecord. The RMON Events form appears.
80
.
RUGGEDCOM ROS
User Guide
Section 3.9.3.2,
Viewing a List of RMON Events