Connection List - Technicolor TG670 Cli Reference Manual

connection list

Display the currently known connections.
SYNTAX:
connection list
where:
id
nr
history
proto
ip
port
intf
routelabel
qoslabel
application
reserved
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[id = <number{0-9999}>]
[nr = <number{1-10000}>]
[history = <{disabled|enabled}>]
[proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|
pup|rdp|rsvp|tcp|udp|vines|xns-idp|6to4|ipip}
or number>]
[ip = <ip-range>]
[port = <port-range>]
[intf = <{loop|ipsec0|Internet|lan1|wan1|dmz1|
guest1}>]
[routelabel = <{None|DSCP|Interactive|
Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|
VoIP-Signal|default}>]
[qoslabel = <{None|DSCP|Interactive|
Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|
VoIP-Signal|default}>]
[application = <{IP6TO4|PPTP|ESP|IKE|SIP|
JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|SNMP_TRAP|
FTP}>]
[reserved = <{false|true}>]
[accelerated = <{false|true}>]
[prioritized = <{false|true}>]
[string = <string>]
[beginstring = <string>]
The connection ID.
The maximum number of connections to display (30 by
default).
If enabled, show history.
The IP protocol (name or number).
The IP address or range.
The port number or range.
The IP interface name.
The route label name.
The QoS label name.
The name of CONN/NAT application helper.
Filter on "R" connection flag .
CONNECTION COMMANDS
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
113