Snmp Group Add - Technicolor TG670 Cli Reference Manual

SNMP COMMANDS

snmp group add

Add a access group.
SYNTAX:
snmp group add
where:
groupname
contextname
securitymodel
securitylevel
readview
writeview
notifyview
storage
978
groupname = <string>
[contextname = <{""}>]
securitymodel = <{snmpv1|snmpv2c|usm}>
securitylevel = <{noAuthNoPriv|authNoPriv|
authPriv}>
[readview = <{V1View|View_all|basic_readview|
WanAdmin_readview|extended_readview|
WanAdmin_writeview|extended_writeview}>]
[writeview = <{V1View|View_all|basic_readview|
WanAdmin_readview|extended_readview|
WanAdmin_writeview|extended_writeview}>]
[notifyview = <{V1View|View_all|
basic_readview|WanAdmin_readview|
extended_readview|WanAdmin_writeview|
extended_writeview}>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
Configure a human readable string representing a name of a
group.
Configure a context name used to match the context name
in a management request.
Configure the security model for this access control group.
Configure the security level for this access control group.
Configure a view name identifying the view subtrees
accessible for read requests.
Configure a view name identifying the view subtrees
accessible for write requests.
Configure a view name identifying the view subtrees from
which objects can be included in notifications.
Configure the storage type.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL