Ipsec Peer Modify - Technicolor TG670 Cli Reference Manual

IPSEC COMMANDS

ipsec peer modify

Changes a peer gateway profile.
SYNTAX:
ipsec peer modify
where:
name
remoteaddr
backupaddr
exchmode
localid
remoteid
phyif
descr
auth
client/server
options
666
name = <>
[remoteaddr = <IP address or hostname>]
[backupaddr = <IP address or hostname>]
[exchmode = <{main|aggressive}>]
[localid = <Identity : format(type)value; type
being >]
[remoteid = <Identity : format(type)value;
type being >]
[phyif = <{loop|Internet|lan1|wan1|dmz1|
guest1|any}>]
[descr = <{AES_SHA1|AES_MD5|3DES_SHA1|
3DES_MD5|DES_SHA1|DES_MD5|AES_SHA1_Adv|
3DES_SHA1_Adv}>]
[auth = <>]
[client/server = <>]
[options = <>]
The name of the peer profile to change.
Black IP address/hostname of the peer IPSEC gateway.
Black IP address/hostname of the redundant peer IPSEC
gateway.
Authenticated key exchange mode.
The ID by which the peer gate identifies this gate.
The ID of the peer gate.
Interface this peer applies to.
Up to 4 phase one (ISAKMP) security descriptors separated
by |
Authentication attribute.
VPN dialup client/server descriptor.
Peer options.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL