Eth Switch Qos Weights - Technicolor TG670 Cli Reference Manual

ETH COMMANDS

eth switch qos weights

Configure the queue weights.
SYNTAX:
eth switch qos weights
where:
queue0
queue1
queue2
queue3
472
queue0 = <number{0-100}>
queue1 = <number{0-100}>
queue2 = <number{0-100}>
queue3 = <number{0-100}>
Weight of queue 0 in WFQ (in %).
Weight of queue 1 in WFQ (in %).
Weight of queue 2 in WFQ (in %).
Weight of queue 3 in WFQ (in %).
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
REQUIRED
REQUIRED
REQUIRED