Eth Efm Qos Queue Config - Technicolor TG670 Cli Reference Manual

eth efm qos queue config

Configure TX Queue entry.
SYNTAX:
eth efm qos queue config
where:
intf
weight
subprio
maxpackets
loprio
hiprio
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
intf = <{queue_e0|queue_e1|queue_e2|queue_e3|
queue_e4|queue_e5}>
[weight = <number{0-64}>]
[subprio = <number{0-8}>]
[maxpackets = <number{0-2500}>]
[loprio = <number{0-15}>]
[hiprio = <number{0-15}>]
The name of the Transmit Queue.
Weight value of the chosen weight algorithm.
Sub Priority of the queue, evaluated against other channels
when strict priority is chosen.
The maximum number of packets in the queues.
The lowest internal priority boundary for entering this
queue.
The highest internal priority boundary for entering this
queue.
ETH COMMANDS
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
409