Set Up A Mobile Fallback Connection - Technicolor TG789vac v2 Setup And User Manual

Modem router
Hide thumbs Also See for TG789vac v2:
Table of Contents

Advertisement

2.6 Set up a mobile fallback connection

Mobile fallback
Your TG789vac v2 allows you to use mobile Internet as fallback for your main Internet connection. This means that your
TG789vac v2 will automatically switch to the mobile Internet connection when your main Internet connection is down.
Depending on your subscription, downloading and uploading over the mobile Internet connection may results in
additional charges.
Your TG789vac v2 will automatically switch back to the main Internet connection as soon as it becomes available again.
What do I need?
To set up mobile fallback connection, you need:
• A mobile Internet dongle
Only use the mobile Internet dongles provided by your service provider.
• A registered Security Identity Module (SIM) card.
Connect your mobile Internet dongle to the TG789vac v2
Proceed as follows:
1 Make sure that the SIM card is correctly inserted in your mobile Internet dongle.
2 Plug the mobile Internet dongle into an available USB port of your TG789vac v2.
3 Wait for two minutes to allow your TG789vac v2 to detect the mobile Internet dongle.
Configure the mobile Internet connection
Proceed as follows:
1 Browse to the TG789vac v2 web interface.
For more information, see
2 Click the Mobile 3G/4G card header.
DMS3-CTC-25-191 v2.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
"4.1.1 Accessing the TG789vac v2 web interface from your local network" on page
2 Setting up your TG789vac v2
38.
21

Advertisement

Table of Contents
loading

Table of Contents