snmp community add
Config an SNMP community string.
SYNTAX:
snmp community add
where:
index
securityname
communityname
context
targettag
storage
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
index = <string>
securityname = <string>
communityname = <password>
[context = <{""}>]
[targettag = <string>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
Configure a human readable string uniquely identifying an
entry in the snmpCommunityTable.
Configure a security name for this community string.
Configure SNMP community string.
Configure a context name.
Configure a string which is used to select a set of entries in
the snmpTargetAddrTable for source address checking.
Configure the storage type.
SNMP COMMANDS
REQUIRED
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
967