Mlp Debug Traceconfig - Technicolor TG670 Cli Reference Manual

MLP COMMANDS

mlp debug traceconfig

Modify mlp trace settings.
SYNTAX:
mlp debug traceconfig
where:
trace
762
[trace = <{disabled|enabled|full}>]
Select mlp trace level.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL