Atm Oam Cc Modify - Technicolor TG670 Cli Reference Manual

ATM COMMANDS

atm oam cc modify

Modify CC on the connection.
SYNTAX:
atm oam cc modify
where:
port
vpi
vci
transmit
receive
auto
span
60
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
vpi = <number{0-31}>
[vci = <number{0-511}>]
[transmit = <{disabled|enabled}>]
[receive = <{disabled|enabled}>]
[auto = <{disabled|enabled}>]
[span = <{segment|end2end}>]
The ATM port number.
The Virtual Path Identifier.
The Virtual Channel Identifier.
Enable/disable transmission of CC cells.
Enable/disable loss of continuity.
Enable/disable remote CC activation/deactivation.
End2end or segment continuity check.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL