Ipsec Peer Descriptor Modify - Technicolor TG670 Cli Reference Manual

IPSEC COMMANDS

ipsec peer descriptor modify

Changes a phase 1 (IKE) security descriptor.
SYNTAX:
ipsec peer descriptor modify
where:
name
crypto
keylen
integrity
group
lifetime_secs
664
name = <{AES_SHA1|AES_MD5|3DES_SHA1|3DES_MD5|
DES_SHA1|DES_MD5|AES_SHA1_Adv|3DES_SHA1_Adv}>
[crypto = <{DES|3DES|AES}>]
[keylen = <{0|128|192|256}>]
[integrity = <{MD5|SHA1}>]
[group = <{MODP768|MODP1024|MODP1536}>]
[lifetime_secs = <number>]
Security descriptor profile to change.
Specify the crypto algorithm to use.
Specify the key length for the crypto algorithm.
Specify the integrity algorithm to use.
Specify the DH group : MOD768(DH1), MOD1024(DH2),
MOD1536(DH5)
The lifetime expressed in seconds (Lifetime must differ from
0 otherwise unset).
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL