atm debug traceconfig
Display/Modify AAL5 debug trace configuration.
SYNTAX:
atm debug traceconfig
where:
len
intf
state
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[len = <number>]
[intf = <{atm_Internet}>]
[state = <{disabled|enabled}>]
Maximum number of AAL5 payload bytes that will be
shown (0-2000, global setting).
The name of the ATM interface to configure.
Enable/disable AAL5 debug tracing.
ATM COMMANDS
OPTIONAL
OPTIONAL
OPTIONAL
51